Preset Memory; Loading Cross Pooint; Saving Cross Point - IDK MSD-72 Series User Manual

9.13 Preset memory

9.13.1 Loading cross pooint

Top → PRESET MEMORY → LOAD CROSS POINT
Menu
Setting value No.1 to No.9
You can load the I/O channel settings of video and audio saved in the cross point memory.
The setting of this menu is not updated until the MENU/SET key is pressed. Make sure to press the
MENU/SET key to update the setting.
Note:
Functions of control command execution keys (COMMAND A to COMMAND I) changes and the UNLOCK
key LED shows each status as follows.
・UNLOCK key lights: Registered control commands are executed.
・UNLOCK key blinks: Registered cross point memories are loaded.
・UNLOCK key does not light: The control command execution keys are locked.

9.13.2 Saving cross point

Top → PRESET MEMORY → SAVE CROSS POINT
Menu
Setting value No.1 to No.9
You can save the I/O channel settings of video and audio into the cross point memory.
Up to nine cross point memories can be saved with their name (up to 10 characters). If you set "---" (not
control) for "9.13.3 Editing cross point", a writing method (CONTINUE or DELETE) can be selected.
The setting of this menu is not updated until the MENU/SET key is pressed. Make sure to press the
MENU/SET key to update the setting.
■ Writing method
"CONTINUE": "---" (not control) will be kept in the cross point memory.
"DELETE": the current input channel settings will be overwritten.
Current input channel setting
OUT1 = Input channel 1
OUT2 = Input channel 2
Current cross point memory1
OUT1 = Input channel 3
OUT2 = Not control
"CONTINUE"
[Default]
"DELETE"
[Figure 9.26] Saving cross point
【See: ：9.13.2 Saving cross point】
111
MSD-72 Series User's Guide
"---" (not control) will be kept.
OUT1 = Input channel1
OUT2 = Not control
Input channel settings will be
overwritten.
OUT1 = Input channel1
OUT2 = Input channel2