Cisco Nexus 5600 Series Reference page 73

Show Commands
show ip pim event-history
To display information in the IPv4 Protocol Independent Multicast (PIM) event history buffers, use the
show ip pim event-history command.
Syntax Description
errors
msgs
statistics
Command Default
None
Command Modes
Any command mode
Supported User Roles
network-admin
network-operator
vdc-admin
vdc-operator
Command History Release
5.0(3)N1(1)
Usage Guidelines
This command does not require a license.
Examples
This example shows how to display information in the IPv4 PIM msgs event history buffer:
switch(config)# show ip pim event-history msgs
Msg events for PIM Process
1) Event:E_DEBUG, length:38, at 165671 usecs after Sat Apr 12 08:35:02 2008
2) Event:E_DEBUG, length:38, at 165018 usecs after Sat Apr 12 08:35:02 2008
3) Event:E_DEBUG, length:79, at 165014 usecs after Sat Apr 12 08:35:02 2008
mand
4) Event:E_DEBUG, length:35, at 63168 usecs after Sat Apr 12 08:34:25 2008
5) Event:E_DEBUG, length:46, at 62809 usecs after Sat Apr 12 08:34:25 2008
OL-31626-01
show ip pim event-history {errors | msgs | statistics}
Displays events of type error.
Displays events of type msg.
Displays events of type statistics.
Modification
This command was introduced.
[100] : nvdb: transient thread created
[100] : nvdb: create transcient thread
[100] : comp-mts-rx opc - from sap 3061 cmd pim_show_internal_event_hist_com
[100] : nvdb: terminate transaction
[100] : nvdb: pim_show_df_command returned 0x0
Cisco Nexus 5600 Series NX-OS Multicast Routing Command Reference
show ip pim event-history
MCR-69