Cisco Nexus 5600 Series Reference page 50

show ip igmp snooping querier
show ip igmp snooping querier
To display information about IGMP snooping queriers, use the show ip igmp snooping querier
command.
Syntax Description
vlan vlan-id
Command Default
None
Command Modes
Any command mode
Supported User Roles
network-admin
network-operator
vdc-admin
vdc-operator
Command History Release
5.0(3)N1(1)
Usage Guidelines
This command does not require a license.
Examples
This example shows how to display information about IGMP snooping queriers:
switch(config)# show ip igmp snooping querier
Cisco Nexus 5600 Series NX-OS Multicast Routing Command Reference
MCR-46
show ip igmp snooping querier [vlan vlan-id]
(Optional) Specifies a VLAN. The range is from 1 to 3967 and 4048 to 4093.
Modification
This command was introduced.
Show Commands
OL-31626-01