Cisco Nexus 5600 Series Reference page 224

show forwarding distribution ip igmp snooping
show forwarding distribution ip igmp snooping
To display information about Layer 2 IGMP snooping multicast Forwarding Information Base (FIB)
distribution, use the show forwarding distribution ip igmp snooping command.
Syntax Description
vlan vlan-id
group
group-addr
source
source-addr
Command Default
None
Command Modes
Any command mode
Supported User Roles
network-admin
network-operator
vdc-admin
vdc-operator
Command History Release
6.0(2)N1(1)
Usage Guidelines
This command does not require a license.
Examples
This example shows how to display information about Layer 2 IGMP snooping multicast FIB
distribution:
switch(config)# show forwarding distribution ip igmp snooping
Related Commands Command
test forwarding
distribution perf
Cisco Nexus 5600 Series NX-OS Multicast Routing Command Reference
220
show forwarding distribution ip igmp snooping [vlan vlan-id [group group-addr [source
source-addr]]]
(Optional) Specifies a VLAN. The range is from 1 to 3967 and 4048 to 4093.
(Optional) Specifies a group address.
(Optional) Specifies a source address.
Modification
This command was introduced.
Description
Tests the forwarding distribution performance of the Forwarding
Information Base (FIB).
Chapter Show Commands
OL-31626-01