Cisco Nexus 5600 Series Reference page 263

Chapter I Commands
ip msdp shutdown
To shut down a Multicast Source Discovery Protocol (MSDP) peer, use the ip msdp shutdown
command. To enable the peer, use the no form of this command.
Syntax Description
peer-address
Command Default
Enabled
Command Modes
Global configuration mode
Supported User Roles
network-admin
vdc-admin
Command History Release
6.0(2)N1(1)
Usage Guidelines
This command requires the LAN Base Services license.
Examples
This example shows how to disable an MSDP peer:
switch(config)# ip msdp shutdown 192.168.1.10
This example shows how to enable an MSDP peer:
switch(config)# no ip msdp shutdown 192.168.1.10
Related Commands Command
show ip msdp peer
OL-31626-01
ip msdp shutdown peer-address
no ip msdp shutdown peer-address
IP address of an MSDP peer.
Modification
This command was introduced.
Description
Displays information about MSDP peers.
Cisco Nexus 5600 Series NX-OS Multicast Routing Command Reference
ip msdp shutdown
259