Cisco Nexus 5600 Series Reference page 420

show ip pim df
show ip pim df
To display information about the designated forwarders (DFs) for IPv4 Protocol Independent Multicast
(PIM), use the show ip pim df command.
Syntax Description
rp-or-group
vrf
vrf-name
all
Command Default
None
Command Modes
Any command mode
Supported User Roles
network-admin
network-operator
vdc-admin
vdc-operator
Command History Release
5.0(3)N1(1)
Usage Guidelines
This command requires the LAN Base Services license.
Examples
This example shows how to display information about PIM DFs:
switch(config)# show ip pim df
Cisco Nexus 5600 Series NX-OS Multicast Routing Command Reference
416
show ip pim df [rp-or-group] [vrf {vrf-name | all}]
(Optional) RP or group address.
(Optional) Applies to a virtual routing and forwarding (VRF) instance.
VRF name. The name can be a maximum of 32 alphanumeric characters and is case
sensitive.
Specifies all VRFs.
Modification
This command was introduced.
Chapter Show Commands
OL-31626-01