Cisco Nexus 5600 Series Reference page 455

Chapter Show Commands
show ipv6 pim oif-list
To display information about IPv6 Protocol Independent Multicast (PIM6) interfaces for a group, use the
show ipv6 pim oif-list command.
Syntax Description
group
source
vrf
vrf-name
all
Defaults
None
Command Modes
Any command mode
Supported User Roles
network-admin
network-operator
vdc-admin
vdc-operator
Command History Release
5.0(3)N1(1)
Usage Guidelines
This command requires the Enterprise Services license.
Examples
This example shows how to display PIM6 interfaces for a group:
switch(config)# show ipv6 pim oif-list ff1e::0002
PIM6 OIF-List for VRF default
(*, ff1e::0002/128)
Incoming interface: Ethernet2/2, RPF nbr 0002::0002
Timeout interval: 45 secs left
Oif-list (count: 2):
Timeout-list (count: 0):
Immediate-list (count: 0):
Immediate-timeout-list (count: 0):
switch(config)#
OL-31626-01
show ipv6 pim oif-list group [source] [vrf {vrf-name | all}]
Group address.
(Optional) Source address.
(Optional) Applies to a virtual routing and forwarding (VRF) instance.
VRF name. The name can be a maximum of 32 alphanumeric characters and is case
sensitive.
Specifies all VRFs.
Modification
This command was introduced.
Ethernet8/11, uptime: 00:01:18, pim6
Ethernet8/11, uptime: 00:01:18, pim6
Cisco Nexus 5600 Series NX-OS Multicast Routing Command Reference
show ipv6 pim oif-list
451