Cisco Nexus 5600 Series Reference page 261

Chapter I Commands
ip msdp sa-policy in
To enable filtering of incoming Multicast Source Discovery Protocol (MSDP) Source-Active (SA)
messages, use the ip msdp sa-policy in command. To disable filtering, use the no form of this command.
Syntax Description
peer-address
policy-name
Command Default
Disabled
Command Modes
Global configuration mode
Supported User Roles
network-admin
vdc-admin
Command History Release
6.0(2)N1(1)
Usage Guidelines
This command requires the LAN Base Services license.
Examples
This example shows how to enable filtering of incoming SA messages:
switch(config)# ip msdp sa-policy 192.168.1.10 my_incoming_sa_policy in
This example shows how to disable filtering:
switch(config)# no ip msdp sa-policy 192.168.1.10 my_incoming_sa_policy in
Related Commands Command
show ip msdp peer
OL-31626-01
ip msdp sa-policy peer-address policy-name in
no ip msdp sa-policy peer-address policy-name in
IP address of an MSDP peer.
Route-map policy name.
Modification
This command was introduced.
Description
Displays information about MSDP peers.
Cisco Nexus 5600 Series NX-OS Multicast Routing Command Reference
ip msdp sa-policy in
257