Cisco Nexus 5600 Series Reference page 114

show ipv6 pim route
show ipv6 pim route
To display information about IPv6 Protocol Independent Multicast (PIM6) routes, use the show ipv6
pim route command.
Syntax Description
source
group
vrf
vrf-name
all
Defaults
None
Command Modes
Any command mode
Supported User Roles
network-admin
network-operator
vdc-admin
vdc-operator
Command History Release
5.0(3)N1(1)
Usage Guidelines
This command requires the Enterprise Services license.
Examples
This example shows how to display PIM6 routes:
switch(config)# show ipv6 pim route
PIM6 Routing Table for VRF "default" - 1 entries
(*, ff30::/32), expires 00:02:33
Incoming interface: Null, RPF nbr 0::
Oif-list:
Immediate-list: (0) 00000000, timeout-list: (0) 00000000
Timeout-interval: 2, JP-holdtime round-up: 3
switch(config)#
Cisco Nexus 5600 Series NX-OS Multicast Routing Command Reference
MCR-110
show ipv6 pim route {source group | group [source]} [vrf {vrf-name | all}]
Source address.
Group address.
(Optional) Applies to a virtual routing and forwarding (VRF) instance.
VRF name. The name can be a maximum of 32 alphanumeric characters and is case
sensitive.
Specifies all VRFs.
Modification
This command was introduced.
(0) 00000000, timeout-list: (0) 00000000
Show Commands
OL-31626-01