Cisco Nexus 5600 Series Reference page 478

show startup-config pim
show startup-config pim
To display information about the startup-system configuration for IPv4 Protocol Independent Multicast
(PIM), use the show startup-config pim command.
Syntax Description
all
Command Default
None
Command Modes
Any command mode
Supported User Roles
network-admin
network-operator
vdc-admin
vdc-operator
Command History Release
6.0(2)N1(1)
Usage Guidelines
This command requires the LAN Base Services license.
Examples
This example shows how to display information about the startup-system configuration for IPv4 PIM:
switch(config)# show startup-config pim
Cisco Nexus 5600 Series NX-OS Multicast Routing Command Reference
474
show startup-config pim [all]
(Optional) Displays configured and default information.
Modification
This command was introduced.
Chapter Show Commands
OL-31626-01