Cisco Nexus 5600 Series Reference page 410

restart pim
restart pim
To restart the IPv4 Protocol Independent Multicast (PIM) process, use the restart pim command.
Syntax Description
This command has no arguments or keywords.
Command Default
None
Command Modes
Any command mode
Supported User Roles
network-admin
network-operator
vdc-admin
vdc-operator
Command History Release
6.0(2)N1(1)
Usage Guidelines
This command requires the LAN Base Services license.
Examples
This example shows how to restart the PIM process:
switch(config)# restart pim
Related Commands Command
ip pim flush-routes
Cisco Nexus 5600 Series NX-OS Multicast Routing Command Reference
MCR-406
restart pim
Modification
This command was introduced.
Description
Enables flushing routes when the PIM process is restarted.
R Commands
OL-31626-01