Cisco Nexus 5600 Series Reference page 59

Show Commands
show ip msdp peer
To display information about Multicast Source Discovery Protocol (MSDP) peers, use the show ip msdp
peer command.
Syntax Description
peer-address
vrf
vrf-name
all
Command Default
None
Command Modes
Any command mode
Supported User Roles
network-admin
network-operator
vdc-admin
vdc-operator
Command History Release
5.0(3)N1(1)
Usage Guidelines
This command requires the LAN Base Services license.
Examples
This example shows how to display information about MSDP peers:
switch(config)# show ip msdp peer
OL-31626-01
show ip msdp peer [peer-address] [vrf {vrf-name | all}]
(Optional) IP address of an MSDP peer.
(Optional) Applies to a virtual routing and forwarding (VRF) instance.
VRF name. The name can be a maximum of 32 alphanumeric characters and is case
sensitive.
Specifies all VRFs.
Modification
This command was introduced.
Cisco Nexus 5600 Series NX-OS Multicast Routing Command Reference
show ip msdp peer
MCR-55