Cisco Nexus 5600 Series Reference page 192

show startup-config igmp
show startup-config igmp
To display information about the startup-system configuration for IGMP, use the show startup-config
igmp command.
Syntax Description
all
Command Default
None
Command Modes
Any command mode
Supported User Roles
network-admin
network-operator
vdc-admin
vdc-operator
Command History Release
6.0(2)N1(1)
Usage Guidelines
This command requires the LAN Base Services license.
Examples
This example shows how to display information about the IGMP startup-system configuration:
switch(config)# show startup-config igmp
Cisco Nexus 5600 Series NX-OS Multicast Routing Command Reference
188
show startup-config igmp [all]
(Optional) Displays configured and default information.
Modification
This command was introduced.
Chapter Show Commands
OL-31626-01