Cisco Nexus 5600 Series Reference page 304

clear ipv6 pim policy statistics
clear ipv6 pim policy statistics
To clear Protocol Independent Multicast for IPv6 (PIM6) policy counters, use the clear ipv6 pim policy
statistics command.
Syntax Description
jp-policy
neighbor-
policy
if-type
if-number
Defaults
None
Command Modes
Any command mode
Supported User Roles
network-admin
network-operator
vdc-admin
vdc-operator
Command History Release
4.0(1)
Usage Guidelines
This command requires the Enterprise Services license.
Examples
This example shows how to clear PIM6 join-prune policy counters:
switch(config)# clear ipv6 pim policy statistics jp-policy
Related Commands Command
show ipv6 pim policy
statistics
Cisco Nexus 5600 Series NX-OS Multicast Routing Command Reference
300
clear ipv6 pim policy statistics {jp-policy | neighbor-policy} if-type if-number
Specifies the statistics for join-prune policy.
Specifies the statistics for neighbor policy.
Interface type. For more information, use the question mark (?) online help function.
Interface or subinterface number. For more information about the numbering syntax
for your networking device, use the question mark (?) online help function.
Modification
This command was introduced.
Description
Displays PIM6 policy statistics.
Chapter C Commands
OL-31626-01