Cisco Nexus 5600 Series Reference page 218

ip igmp snooping report-suppression
ip igmp snooping report-suppression
To enable limiting the membership report traffic sent to multicast-capable routers, use the ip igmp
snooping report-suppression command. To disable the limitation, use the no form of this command.
Syntax Description
This command has no arguments or keywords.
Command Default
Enabled
Command Modes
Global configuration mode
VLAN configuration mode
Supported User Roles
network-admin
vdc-admin
Command History Release
6.0(2)N1(1)
4.0(3)
Usage Guidelines
When you disable report suppression, all IGMP reports are sent as is to multicast-capable routers.
This command does not require a license.
Examples
This example shows how to enable limiting the membership report traffic:
switch(config)# vlan 1
switch(config-vlan)# ip igmp snooping report-suppression
switch(config-vlan)#
This example shows how to disable limiting the membership report traffic:
switch(config)# vlan 1
switch(config-vlan)# no ip igmp snooping report-suppression
switch(config-vlan)#
Related Commands Command
show ip igmp snooping Displays IGMP snooping information.
Cisco Nexus 5600 Series NX-OS Multicast Routing Command Reference
214
ip igmp snooping report-suppression
no ip igmp snooping report-suppression
Modification
This command was introduced.
Global configuration mode was added.
Description
Chapter I Commands
OL-31626-01