Cisco Nexus 5600 Series Reference page 346

ip pim log-neighbor-changes
ip pim log-neighbor-changes
To generate syslog messages that list the IPv4 Protocol Independent Multicast (PIM) neighbor state
changes, use the ip pim log-neighbor-changes command. To disable messages, use the no form of this
command.
Syntax Description
This command has no arguments or keywords.
Command Default
Disabled
Command Modes
Global configuration mode
VRF configuration mode
Supported User Roles
network-admin
vdc-admin
Command History Release
6.0(2)N1(1)
Usage Guidelines
This command requires the LAN Base Services license.
Examples
This example shows how to generate syslog message that list the PIM neighbor state changes:
switch(config)# ip pim log-neighbor-changes
This example shows how to disable logging:
switch(config)# no ip pim log-neighbor-changes
Related Commands Command
logging level ip pim
Cisco Nexus 5600 Series NX-OS Multicast Routing Command Reference
342
ip pim log-neighbor-changes
no ip pim log-neighbor-changes
Modification
This command was introduced.
Description
Configures the logging level of PIM messages.
Chapter I Commands
OL-31626-01