Cisco Nexus 5600 Series Reference page 58

show ip msdp mesh-group
show ip msdp mesh-group
To display information about Multicast Source Discovery Protocol (MSDP) mesh groups, use the show
ip msdp mesh-group command.
Syntax Description
mesh-group
vrf
vrf-name
all
Command Default
None
Command Modes
Any command mode
Supported User Roles
network-admin
network-operator
vdc-admin
vdc-operator
Command History Release
5.0(3)N1(1)
Usage Guidelines
This command requires the LAN Base Services license.
Examples
This example shows how to display information about MSDP mesh groups:
switch(config)# show ip msdp mesh-group
Cisco Nexus 5600 Series NX-OS Multicast Routing Command Reference
MCR-54
show ip msdp mesh-group [mesh-group] [vrf {vrf-name | all}]
(Optional) Mesh group name.
(Optional) Applies to a virtual routing and forwarding (VRF) instance.
VRF name. The name can be a maximum of 32 alphanumeric characters and is case
sensitive.
Specifies all VRFs.
Modification
This command was introduced.
Show Commands
OL-31626-01