Cisco Nexus 5600 Series Reference page 449

Chapter Show Commands
show ipv6 pim df
To display information about the designated forwarders (DFs) for IPv6 Protocol Independent Multicast
(PIM6), use the show ipv6 pim df command.
Syntax Description
rp-or-group
vrf
vrf-name
all
Defaults
None
Command Modes
Any command mode
Supported User Roles
network-admin
network-operator
vdc-admin
vdc-operator
Command History Release
5.0(3)N1(1)
Usage Guidelines
This command requires the Enterprise Services license.
Examples
This example shows how to display information about PIM6 DFs:
switch(config)# show ipv6 pim df
Bidir-PIM6 Designated Forwarder Information for VRF "default"
RP Address (ordinal)
0001::0001 (7)
Interface
* Lo1
switch(config)#
OL-31626-01
show ipv6 pim df [rp-or-group] [vrf {vrf-name | all}]
(Optional) RP or group address.
(Optional) Applies to a virtual routing and forwarding (VRF) instance.
VRF name. The name can be a maximum of 32 alphanumeric characters and is case
sensitive.
Specifies all VRFs.
Modification
This command was introduced.
RP Metric
[0/0]
DF Address
0::
Cisco Nexus 5600 Series NX-OS Multicast Routing Command Reference
Group Range
ff00::/8
DF State DF Metric
Lose [0/0]
show ipv6 pim df
DF Uptime
00:00:02
445