Cisco Nexus 5600 Series Reference page 49

Show Commands
show ip igmp snooping mrouter
To display the multicast routers detected by IGMP snooping, use the show ip igmp snooping mrouter
command.
Syntax Description
vlan vlan-id
Command Default
None
Command Modes
Any command mode
Supported User Roles
network-admin
network-operator
vdc-admin
vdc-operator
Command History Release
5.0(3)N1(1)
4.1(3)
Usage Guidelines
This command does not require a license.
Examples
This example shows how to display the multicast routers detected by IGMP snooping:
switch(config)# show ip igmp snooping mrouter
Type: S - Static, D - Dynamic, V - vPC Peer Link
Type: S - Static, D - Dynamic, V - vPC Peer Link, I - Internal
Vlan
20
switch(config)#
OL-31626-01
show ip igmp snooping mrouter [vlan vlan-id]
(Optional) Specifies a VLAN. The range is from 1 to 3967 and 4048 to 4093.
Modification
This command was introduced.
Changed output to include vPC information.
Router-port Type
Vlan20 I
Cisco Nexus 5600 Series NX-OS Multicast Routing Command Reference
Uptime Expires
04:16:16 never (down)
show ip igmp snooping mrouter
MCR-45