Cisco Nexus 5600 Series Reference page 211
Nx-os multicast routing command reference
Hide thumbs
Also See for Nexus 5600 Series:
- Configuration manual (378 pages) ,
- Hardware installation manual (100 pages)
Table of Contents
Advertisement
Chapter
I Commands
ip igmp snooping link-local-groups-suppression
To enable suppression of IGMP reports from link-local groups, use the ip igmp snooping
link-local-groups-suppression command. To disable suppression of these reports, use the no form of
this command.
Syntax Description
This command has no arguments or keywords.
Command Default
Enabled
Command Modes
Global configuration mode
VLAN configuration mode
Supported User Roles
network-admin
vdc-admin
Command History
Release
6.0(2)N1(1)
Usage Guidelines
If this setting is disabled on the entire device, then it is disabled on all VLANs on device, irrespective of
the specific VLAN setting.
This command does not require a license.
Examples
This example shows how to enable suppression of IGMP reports from link-local groups:
switch(config)# vlan 1
switch(config-vlan)# ip igmp snooping link-local-groups-suppression
switch(config-vlan)#
This example shows how to disable suppression of IGMP reports from link-local groups:
switch(config)# vlan 1
switch(config-vlan)# no ip igmp snooping link-local-groups-suppression
switch(config-vlan)#
Related Commands
Command
show ip igmp snooping Displays IGMP snooping information.
OL-31626-01
ip igmp snooping link-local-groups-suppression
no ip igmp snooping link-local-groups-suppression
Modification
This command was introduced.
Description
Cisco Nexus 5600 Series NX-OS Multicast Routing Command Reference
ip igmp snooping link-local-groups-suppression
207
Advertisement
Table of Contents
