Cisco Nexus 5600 Series Reference page 411

R Commands
restart pim6
To restart the IPv6 Protocol Independent Multicast (PIM6) process, use the restart pim6 command.
Syntax Description
This command has no arguments or keywords.
Defaults
None
Command Modes
Any command mode
Supported User Roles
network-admin
network-operator
vdc-admin
vdc-operator
Command History Release
5.0(3)N1(1)
Usage Guidelines
This command requires the Enterprise Services license.
Examples
This example shows how to restart the PIM6 process:
switch(config)# restart pim6
Related Commands Command
ipv6 pim flush-routes
OL-31626-01
restart pim6
Modification
This command was introduced.
Description
Enables flushing routes when the PIM6 process is restarted.
Cisco Nexus 5600 Series NX-OS Multicast Routing Command Reference
restart pim6
MCR-407