Cisco Nexus 5600 Series Reference page 124

show routing ipv6 multicast clients
show routing ipv6 multicast clients
To display information about IPv6 multicast routing clients, use the show routing ipv6 multicast clients
command.
Syntax Description
client-name
Defaults
None
Command Modes
Any command mode
Supported User Roles
network-admin
network-operator
vdc-admin
vdc-operator
Command History Release
5.0(3)N1(1)
Usage Guidelines
This command requires the Enterprise Services license.
Examples
This example shows how to display information about IPv6 multicast routing clients:
switch(config)# show routing ipv6 multicast clients icmpv6
IPv6 Multicast Routing Client information
Client: icmpv6, client-id: 2, pid: 3742, mts-sap: 282
Shared-memory: icmpv6, wants notifications
Protocol is join-group owner
Join notifications:
Prune notifications:
RPF notifications:
Delete notifications:
Clear mroute notifications: sent 0, fail 0
Add route requests:
Cisco Nexus 5600 Series NX-OS Multicast Routing Command Reference
MCR-120
show routing ipv6 multicast clients [client-name]
(Optional) One of the following multicast routing client names:
•
m6rib
•
icmpv6
•
ipv6
•
static
•
pim6
Modification
This command was introduced.
sent 1, fail 0, ack rcvd 1
sent 0, fail 0, ack rcvd 0
sent 0, fail 0, ack rcvd 0
sent 0, fail 0, ack rcvd 0
rcvd 0, ack sent 0, ack fail 0
Show Commands
OL-31626-01