Cisco Nexus 5600 Series Reference page 363

Chapter I Commands
Examples
This example shows how to create the PIM (*, G) state only for the group prefixes defined in
my_group_map:
switch(config)# ip pim spt-threshold infinity group-list my_group_map
This example shows how to remove the creation of the (*, G) state only:
switch(config)# no ip pim spt-threshold infinity
Related Commands Command
show ip pim rp
OL-31626-01
Description
Displays information about PIM RPs.
Cisco Nexus 5600 Series NX-OS Multicast Routing Command Reference
ip pim spt-threshold infinity
359