Cisco Nexus 5600 Series Reference page 249

Chapter I Commands
ip msdp flush-routes
To flush routes when the Multicast Source Discovery Protocol (MSDP) process is restarted, use the ip
msdp flush-routes command. To leave routes in place, use the no form of this command.
Syntax Description
This command has no arguments or keywords.
Command Default
The routes are not flushed.
Command Modes
Global configuration mode
Supported User Roles
network-admin
vdc-admin
Command History Release
6.0(2)N1(1)
Usage Guidelines
To display whether flush routes are configured, use this command line:
switch(config)# show running-config
This command requires the LAN Base Services license.
Examples
This example shows how to configure flushing routes when the MSDP process is restarted:
switch(config)# ip msdp flush-routes
This example shows how to configure leaving routes when the MSDP process is restarted:
switch(config)# no ip msdp flush-routes
Related Commands Command
show running-config
OL-31626-01
ip msdp flush-routes
no ip msdp flush-routes
Modification
This command was introduced.
Description
Displays information about the running-system configuration.
Cisco Nexus 5600 Series NX-OS Multicast Routing Command Reference
|
include flush-routes
ip msdp flush-routes
245