Cisco Nexus 5600 Series Reference page 157

Chapter I Commands
ip igmp group-timeout
To configure a group membership timeout for IGMPv2, use the ip igmp group-timeout command. To
return to the default timeout, use the no form of this command.
Syntax Description
timeout
Command Default
The group membership timeout is 260 seconds.
Command Modes
Interface configuration mode
Supported User Roles
network-admin
vdc-admin
Command History Release
6.0(2)N1(1)
Usage Guidelines
This command does not require a license.
Examples
This example shows how to configure a group membership timeout:
switch(config)# interface ethernet 2/2
switch(config-if)# ip igmp group-timeout 200
switch(config-if)#
This example shows how to reset a group membership timeout to the default:
switch(config)# interface ethernet 2/2
switch(config-if)# no ip igmp group-timeout
switch(config-if)#
Related Commands Command
show ip igmp interface Displays IGMP information about the interface.
OL-31626-01
ip igmp group-timeout timeout
no ip igmp group-timeout [timeout]
Timeout in seconds. The range is from 3 to 65,535. The default is 260.
Modification
This command was introduced.
Description
Cisco Nexus 5600 Series NX-OS Multicast Routing Command Reference
ip igmp group-timeout
153