Cisco Nexus 5600 Series Reference page 319

Chapter I Commands
switch(config)# ip pim auto-rp mapping-agent ethernet 2/1
This example shows how to remove the Auto-RP mapping agent configuration:
switch(config)# no ip pim auto-rp mapping-agent ethernet 2/1
Related Commands Command
ip pim border
ip pim
send-rp-discovery
show ip pim rp
OL-31626-01
Description
Configures a router to be on the edge of a PIM domain.
Configures a router as an Auto-RP mapping agent.
Displays information about PIM RPs.
Cisco Nexus 5600 Series NX-OS Multicast Routing Command Reference
ip pim auto-rp mapping-agent
315