Cisco Nexus 5600 Series Reference page 440

show ip pim statistics
show ip pim statistics
To display information about the packet counter statistics for IPv4 Protocol Independent Multicast
(PIM), use the show ip pim statistics command.
Syntax Description
vrf
vrf-name
all
default
management
Command Default
None
Command Modes
Any command mode
Supported User Roles
network-admin
network-operator
vdc-admin
vdc-operator
Command History Release
6.0(2)N1(1)
4.1(3)
Usage Guidelines
This command requires the LAN Base Services license.
Examples
This example shows how to display information about IPv4 PIM statistics (if PIM is not in vPC mode,
the vPC statistics are not displayed):
switch(config)# show ip pim statistics
PIM Global Counter Statistics for VRF:default, last reset: never
Register processing (sent/received):
BSR processing (sent/received):
Cisco Nexus 5600 Series NX-OS Multicast Routing Command Reference
436
show ip pim statistics [vrf {vrf-name | all | default | management}]
(Optional) Applies to a virtual routing and forwarding (VRF) instance.
VRF name. The name can be a maximum of 32 alphanumeric characters and is case
sensitive.
Specifies all VRFs.
Specifies the default VRF.
Specifies the management VRF.
Modification
This command was introduced.
Changed output to include vPC information when PIM is in vPC mode.
Registers: 0/0, Null registers: 0/0, Register-Stops: 0/0
Registers received and not RP: 0
Registers received for SSM groups: 0
Bootstraps: 0/0, Candidate-RPs: 0/0
BSs from non-neighbors: 0, BSs from border interfaces: 0
BS length errors: 0, BSs which RPF failed: 0
Chapter Show Commands
OL-31626-01