Cisco Nexus 5600 Series Reference page 153

Chapter I Commands
ip igmp enforce-router-alert
To enable the enforce router alert option check for IGMPv2 and IGMPv3 packets, use the ip igmp
enforce-router-alert command. To disable the option check, use the no form of this command.
Syntax Description
This command has no arguments or keywords.
Command Default
Enabled
Command Modes
Global configuration mode
Supported User Roles
network-admin
vdc-admin
Command History Release
6.0(2)N1(1)
Usage Guidelines
This command does not require a license.
Examples
This example shows how to enable the enforce router alert option check:
switch(config)# ip igmp enforce-router-alert
This example shows how to disable the enforce router alert option check:
switch(config)# no ip igmp enforce-router-alert
Related Commands Command
show running-config
igmp
OL-31626-01
ip igmp enforce-router-alert
no ip igmp enforce-router-alert
Modification
This command was introduced.
Description
Displays information about the IGMP running-system configuration.
Cisco Nexus 5600 Series NX-OS Multicast Routing Command Reference
ip igmp enforce-router-alert
149