Cisco Nexus 5600 Series Reference page 246

ip msdp description
ip msdp description
To configure a description for the Multicast Source Discovery Protocol (MSDP) peer, use the ip msdp
description command. To remove the description for the peer, use the no form of this command.
Syntax Description
peer-address
text
Command Default
None
Command Modes
Global configuration mode
Supported User Roles
network-admin
vdc-admin
Command History Release
6.0(2)N1(1)
Usage Guidelines
This command requires the LAN Base Services license.
Examples
This example shows how to configure an MSDP peer description:
switch(config)# ip msdp description 192.168.1.10 engineering peer
This example shows how to remove an MSDP peer description:
switch(config)# no ip msdp description 192.168.1.10
Related Commands Command
show ip msdp peer
Cisco Nexus 5600 Series NX-OS Multicast Routing Command Reference
242
ip msdp description peer-address text
no ip msdp description peer-address [text]
IP address of MSDP peer.
Text description.
Modification
This command was introduced.
Description
Displays information about MSDP peers.
Chapter I Commands
OL-31626-01