Cisco Nexus 5600 Series Reference page 123

Show Commands
show routing ipv6 multicast
To display information about IPv6 multicast routes, use the show routing ipv6 multicast command.
Syntax Description
vrf
vrf-name
all
source
group
Defaults
None
Command Modes
Any command mode
Supported User Roles
network-admin
network-operator
vdc-admin
vdc-operator
Command History Release
5.0(3)N1(1)
Usage Guidelines
This command requires the Enterprise Services license.
Examples
This example shows how to display information about IPv6 multicast routes:
switch(config)# show routing ipv6 multicast
IPv6 Multicast Routing Table for VRF "default"
switch(config)#
OL-31626-01
show routing ipv6 multicast [vrf {vrf-name | all}] {{source group} | {group [source]}}
(Optional) Applies to a virtual routing and forwarding (VRF) instance.
VRF name. The name can be a maximum of 32 alphanumeric characters and is case
sensitive.
Specifies all VRFs.
Source address for routes.
Group address for routes.
Modification
This command was introduced.
Cisco Nexus 5600 Series NX-OS Multicast Routing Command Reference
show routing ipv6 multicast
MCR-119