Drive Encoder Reference Level; Drive Encoder Reference Scaling; Drive Encoder Reference Destination; Encoder Reset - Emerson 2202 Advanced User's Manual

Menu 15 Parameter
Introduction
I/O options x.00
15.57

Drive encoder reference level

Bit SP
Coding
Range -100% to +100%
Update rate Background write
This parameter shows the percentage of the encoder reference level being used.
15.58

Drive encoder reference scaling

Bit SP
Coding
Range 0.000 to 4.000
Default 1.000
Update rate Background read
The encoder reference is scaled by this parameter, before being sent to the encoder reference destination.
15.59

Drive encoder reference destination

Bit SP
Coding
Range Pr 0.00 to Pr 21.51
Default Pr 0.00
Update rate Drive read on reset
This parameter may be routed to any non-protected drive parameter.
After a modification to this parameter, the destination is only changed when a reset is performed.
15.60

Encoder reset

Bit SP
Coding
1
Range OFF(0) or On(1)
Default OFF(0)
Encoder only: 13ms
Update rate
All I/O routed: 30ms
Setting this Bit parameter to On will reset the drive encoder revolution counter (Pr 15.53) and drive encoder position (Pr 15.54) to zero.
NOTE
Please refer to the SM-I/O Lite/ SM-I/O Timer user guide for further information on the SM-I/O Lite and SM-I/O Timer.
184
Parameter Keypad and
description format display
FI DE Txt VM DP ND
1 1
FI DE Txt VM DP ND
3
FI DE Txt VM DP ND
1 2
FI DE Txt VM DP ND
www.controltechniques.com
Serial CT Modbus PLC Ladder
communications RTU programming
RA NC NV PT US RW BU
1
RA NC NV PT US RW BU
1 1
RA NC NV PT US RW BU
1 1 1
RA NC NV PT US RW BU
1
Advanced parameter
CTSoft Menu 0
PS
PS
1
PS
1
PS
Commander SK Advanced User Guide
Issue Number: 9
descriptions