Solutions Module Id; Menu 15: Solutions Module Set-Up - Emerson 2202 Advanced User's Manual

Parameter Parameter
Introduction
x.00 description format
10.15

Menu 15: Solutions Module set-up

Figure 10-43 Location of Solutions Module slot
NOTE
The Solutions Module must be installed when the drive is powered down.
Parameters common to all catergories
Parameter
Pr 15.01

Solutions Module ID

Pr 15.02 Solutions Module software version
Pr 15.50 Solutions Module error status
Pr 15.51 Solutions Module software sub-version
The Solutions Module ID indicates the type of module that is installed in the slot.
Table 10-26 Solutions Module ID
Solutions Module ID
0 No module installed
203 SM-I/O Timer
204
205 SM-I/O 24V Protected
206 SM-I/O 120V
207
208
401
403 SM-Profibus DP
404
407 SM-Devicenet
408 SM-CANopen
410
421 SM-EtherCAT
NOTE
When a Solutions Module is installed to the Commander SK for the first time, when the drive is powered up, the drive will trip on SL.dF. Power down
and power back up. The Commander SK automatically saves the appropriate information for the Solutions Module. If a Solutions Module is removed,
when the drive is next powered up, the drive will trip on SL.nF. To clear this trip a parameter save needs to be performed.
Commander SK Advanced User Guide
Issue Number: 9
Keypad and Serial
display communications
0 to 599
00.00 to 99.99
0 to 255
Module Category
SM-PELV
Automation
SM-I/O Lite
SM-I/O 32
SM-LON
SM-Interbus
Fieldbus
SM-Ethernet
www.controltechniques.com
CT Modbus PLC Ladder
RTU programming
Range Default
Write on power up
Write on power up
0 to 99 Write on power up
Advanced parameter
CTSoft Menu 0
descriptions
Update rate
BR
Menu 15
171