Menu 8: Digital Inputs And Outputs - Emerson 2202 Advanced User's Manual

Parameter Parameter
Introduction
x.00 description format
10.9

Menu 8: Digital inputs and outputs

Table 10-14 Menu 8 parameters: single line descriptions
Parameter
8.01 Terminal B3 digital input/output state
8.02 Terminal B4 digital input state
8.03 Terminal B5 digital input state
8.04 Terminal B6 digital input state
8.05 Terminal B7 digital input state
8.06 Not used
8.07 Status relay state (Terminals T5 & T6)
8.08 Not used
8.09 Not used
8.10 Not used
8.11 Terminal B3 digital input/output invert
8.12 Terminal B4 digital input invert
8.13 Terminal B5 digital input invert
8.14 Terminal B6 digital input invert
8.15 Terminal B7 digital input invert
8.16 Not used
8.17 Status relay invert
8.18 Not used
8.19 Not used
8.20 Digital I/O read word
Terminal B3 digital input destination/output
8.21
source
8.22 Terminal B4 digital input destination
8.23 Terminal B5 digital input destination
8.24 Terminal B6 digital input destination
8.25 Terminal B7 digital input destination
8.26 Not used
8.27 Status relay source
8.28 Not used
8.29 Not used
8.30 Not used
8.31 Terminal B3 mode select
8.32 Not used
8.33 Not used
8.34 Not used
8.35 Terminal B7 mode select
8.36 Not used
8.37 Not used
8.38 Not used
8.39 Not used
8.40 Not used
8.41 Digital output control (Terminal B3)
Commander SK Advanced User Guide
Issue Number: 9
Keypad and Serial CT Modbus
display communications RTU
{90}
in(0), out(1), Fr(2), PuLS(3)
{34} dig(0), th(1), Fr(2), Fr.hr(3)
n=0(0), At.SP(1), Lo.SP(2),
{35} hEAL(3), Act(4), ALAr(5),
I.Lt(6), At.Ld(7), USEr(8)
www.controltechniques.com
PLC Ladder
CTSoft
programming
Range Default
OFF(0) or On(1)
OFF(0) or On(1)
OFF(0) or On(1)
OFF(0) or On(1)
OFF(0) or On(1)
OFF(0) or On(1)
OFF(0) or On(1) OFF(0)
OFF(0) or On(1) OFF(0)
OFF(0) or On(1) OFF(0)
OFF(0) or On(1) OFF(0)
OFF(0) or On(1) On(1)
OFF(0) or On(1) OFF(0)
0 to 95
Pr 0.00 to 21.51 Pr 10.03
Pr 0.00 to 21.51 Pr 6.29
Pr 0.00 to 21.51 Pr 6.30
Pr 0.00 to 21.51 Pr 6.32
Pr 0.00 to 21.51 Pr 1.41
Pr 0.00 to 21.51 Pr 10.01
out(1)
dig(0)
n=0(0)
Advanced parameter
Menu 0
descriptions
Setting Update Rate
2 ms
2 ms
2 ms
2 ms
2 ms
2 ms
2 ms
2 ms
2 ms
2 ms
2 ms
2 ms
Drive reset
Drive reset
Drive reset
Drive reset
Drive reset
Drive reset
Edit mode exit
Menu 8
B
B
B
109