Disassembling The Keyboard - Technogym Forma Service Maintenance Manual

7.4. DISASSEMBLING THE KEYBOARD

Figure 7.4-1
Figure 7.4-2
Page 7.4
FORMA: Service & Maintenance manual - rev. 3.0
Carry out the procedure described in paragraph
7.1. "Disassembling the display".
With the display placed on a work bench:
1. Unplug the KEYBOARD connector a.
2. Using a pointed tool, lift up and detach a
corner of the KEYBOARD.
To reassemble the new KEYBOARD:
1. Remove backing film from the adhesive side.
2. Apply the adhesive part, starting from the top
and working toward the bottom, being
careful not to bend the KEYBOARD.
3. Insert the connector in the special slot on the
display and connect it to the CPU board.
4. Remove the protective film.
When reassembling the KEYBOARD,
make sure that none of the keys are bent
or remain pushed in.
The KEYBOARD assembly procedure
can only be performed once, because
disassembly damages the tracks and
keys.