By Selecting Stored Data - Konica Minolta CHROMA METER Instruction Manual

2. By Selecting Stored Data

Operating Procedure
6
1.
While the measurement screen is
displayed, press the MENU key.
The setting screen is displayed on the LCD
screen.
2.
Press the RIGHT key or LEFT key to
display the [User Calibr.] screen.
3.
Press the UP key or DOWN key to
select [Select from Stored Data] and
then press the ENTER key.
4.
The screen for selecting the calibration
channel is displayed. Press the UP
key or DOWN key to select the
channel of the calibration standard to
register.
You can check the details of the current data by
pressing the RIGHT key or LEFT key.
[User Calibr.] - [Select from Stored Data]
9 3, 5, 6, 7, 8
1
68
3, 4, 6, 7
2, 4, 6, 7