Name Of Parts - Konica Minolta REGIUS 110 HQ Installation Manual

1.2

Name of Parts

The names of the parts that you need to be aware of when installing the unit are shown below.
Unit Exterior
4*
6
Second front side
No.
1 Air intake
3 Status lamp
5* Operation panel
7 First front panel
9 Second front back panel
11 Ethernet connection port
*: For vertical installation, interchange the dummy operation panel and operation panel locations.
Vertical Installation Configuration
This machine is designed to change the front side (the user access direction) by interchanging the
operation panel locations.
Horizontal installation configuration
(Factory configuration)
Horizontal installation configuration: The first front is the front side. (The machine is shipped in this
configuration.)
Vertical installation configuration: The second front is the front side.
For vertical installation, interchange the operation panel locations.
2 1
3
First front side
Name
Operation
panel
Access
direction
1-6
5*
7
9
8
10
11
Back of the
second front side
No.
2 Cassette insertion slot
4* Dummy operation panel
6 Second front cover
8 Power supply circuit breaker
10 Power supply port
12 First front back panel
Vertical installation configuration

1.2 Name of Parts

12
Back of
the first front side
Name
Operation panel
Access
direction