Setting Ch Id Name - Konica Minolta CHROMA METER CS-200 Instruction Manual

Setting CH ID Name

CH ID name indicates name given to each calibration channel by entering characters.
CH ID name appears on LCD screen in measurement together with calibration channel.
It is helpful if for which object user calibration or target color setting has been done is
entered.
Available number of characters for entry: 9 max
=
Available character type for entry: A to Z, a to z, space, 0 to 9, symbol
=
Operation Procedure
2, 4
1.
Press ESC key when menu or target
value setting menu appears.
Measurement screen appears on LCD screen.
2.
SHIFT
Press key to switch
to SHIFT mode.
[SFT] appears on left bottom. Or make sure that
[SFT] appears on left bottom indicating that this
instrument has been operated in SHIFT mode.
3.
Press either
calibration channel and select
one for CH ID name setting.
5 1, 12
or key to switch
74
1, 7, 11
<
CH01: DEFAULT
Lv ------
x ------
y ------
< >
MODE SINGLE
[ ] =
<
CH : DEFAULT
01
Lv ------
x ------
y ------
< >
MODE SINGLE
[ SFT] =
<
CH : DEFAULT
01
Lv ------
x ------
y ------
< >
MODE SINGLE
[ SFT ] =
9
3, 6, 7, 8
> < >
ANGL 1° VIEW
< >
SPD AUTO
< >
SYNC 60.00Hz
< >
cd/m 2
LENS STANDARD
< >
MEM AUTO NUM
< >
MEMORY DATA
M000 :(NO DATA)
Lv ------
x ------
y ------
[ 2° ]
< >
>
ANGL 1° VIEW
< >
SPD AUTO
< >
SYNC 60.00Hz
< >
cd/m 2
LENS STANDARD
< >
MEM AUTO NUM
< >
MEMORY DATA
M000 :(NO DATA)
Lv ------
x ------
y ------
[ 2° ]
< >
>
ANGL 1° VIEW
< >
SPD AUTO
< >
SYNC 60.00Hz
< >
cd/m 2
LENS STANDARD
< >
MEM AUTO NUM
< >
MEMORY DATA
M000 :(NO DATA)
Lv ------
x ------
y ------
[ 2° ]