Goods/Environment To Prepare On Customer's Side; Controlling Pc; Mounting Stage; Blackout Curtain (Quickly Prepared Darkroom) / Dark Room - Konica Minolta CA-2500 Series Instruction Manual

2d color analyzer
Table of Contents

Advertisement

Goods/Environment to Prepare on Customer's Side

Get prepared for below goods/environment before using this instrument.

Controlling PC

OS
CPU
Memory
Hard disk drive
Display
Other
In addition, following items are useful.

Mounting stage

Table on which this instrument is installed. Below are recommended conditions.
l Can change measurement distance according to measurement object.
l Painted with black to prevent the entrance of light diffusely reflecting.

Blackout curtain (quickly prepared darkroom) / Dark room

Needed to block this instrument and measurement object from outside light.
Get prepared for blackout curtain for quickly prepared dark room or dark room.
: Windows
10 Pro 32 bit, 64 bit
®
Windows
11 Pro
®
(English, Japanese, or Chinese (simplified font) version of the above OS)
The PC must meet the system requirements specified by the applicable
OS or listed below, whichever is higher.
: Equivalent to Pentium
4, 2.8 GHz or better
®
: 1024 MB or more
: At least 80 MB of available disk space is required on the system drive
(drive where the OS is installed).
To install the calibration data, the following disk space is required for
each lens:
• For a standard lens: approximately 540 MB
• For a wide angle lens: approximately 470 MB
• For a telephoto lens: approximately 1.3 GB
To save measurement data on the hard disk, you need to reserve the
following additional space on the hard disk:
• For example, approximately 110 MB is required to save 10 pieces of
measurement data with 980 × 980 resolution.
• About 1 MB is required for configuration files such as the spot setting
file and measurement condition file.
: Display hardware capable of displaying 1280 × 768 pixels / 65,536
colors (High Color: 16-bit color) or better
: CD-ROM drive Required for installation 1 DVD-ROM drive Required for
installation of calibration data
* In place of the above two drives, you can use a single drive that is
capable of reading both CD-R and DVD-R media.
A USB port is required for connection of the instrument.
14

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ca-2500sCa-2500wCa-2500t

Table of Contents