Connecting To A Pc - Konica Minolta T-10A Instruction Manual

Connecting to a PC

You can connect the CHROMA METER to a personal computer using the (optional) T-A15 USB cable. You can
then transfer the measurement data to the computer, and use the computer to store and manage the data.
If you install KONICA MINOLTA's standard T-S10w data management software on your computer, you
will also be able to use the computer to view measurement results in real time and to control multi-point
measurements. The software also makes it possible to use CF correction with MULTI calibration mode, a
feature that is not available on the CHROMA METER alone. For information about how to use the T-S10w
software, read the INSTRUCTION MANUAL.
If you want to use an independent program on PC to control this instrument, download Communication
Specifications from KONICA MINOLTA's website at URL below for your reference
http://konicaminolta.com/instruments/download/software/index.html
(The above URL is subject to change without notice.)
(If the target page will not appear, please search the site by keywords, T-10 and download.)
z Printing is not allowed as long as USB cable T-A15 is plugged to the instrument.
z Connection of the T-A15 USB cable increases the CHROMA METER's consumed current by about
50%. When you have finished using the computer connection, please disconnect the USB cable.
z Be sure to use the USB cable specified in this manual. Using other USB cables than specified may
cause communication errors or noises.
38