Agilent Technologies E4419B User Manual page 56

2 Power Meter Operation
3 To confirm your choice, press
4 Connect the power sensor to the POWER REF output.
5 Press
Example
To calibrate both channels of the power meter. The reference calibration
factors for the power sensors being 98.8% and 99.4% for channel A and channel
B respectively:
• Press
• Press
• Press
• Connect the channel A power sensor to the POWER REF output.
• Press
• Remove the channel A power sensor from the POWER REF output.
• Connect the channel B power sensor to the POWER REF output.
• Press
34
default of 100%. If the value is not correct, press
meter displays the reference calibration factor in a pop-up window. Modify
this reference calibration factor (see below) as desired.
• Use and
positioned.
• Use or to move to other digits.
to calibrate the power meter. During calibration, the wait
Cal A
symbol is displayed. (The power meter automatically turns on the
POWER REF output.)
, .
Cal
. Use the
A Ref CF
.
%
. Use the
B Ref CF
.
%
.
Cal A
.
Cal B
to modify the digit on which the cursor is currently
.
%
, , , and
, , , and
. The power
A Ref CF
keys to enter 98.8. Press
keys to enter 99.4. Press
E4419B Power Meter User's Guide