8 RS232/422
9 Serial Label
10 Rmt I/O
11 Ground Connector
E4419B Power Meter User's Guide
This connector allows the power meter to be controlled remotely using
either the RS232 or RS422 serial interface standards.
Each power meter has its own individual identification number. Refer to
"Instrument serial numbers"
This connector is an RJ-45 series shielded modular jack assembly. It
provides a TTL logic level output when a measurement exceeds a
predetermined limit. TTL inputs are also provided to initiate zero and
calibration cycles.
Binding post, accepts 4 mm plug or bare wire connection.
on page 110 for further information.
Getting Started
1
17