Table 1-1 Relevant Softkeys In Various Mode Of Operation - Agilent Technologies E4419B User Manual

15 The information in this field is displayed on two lines and depends on the

Table 1-1 Relevant Softkeys in Various Mode of Operation

Reference
Number
E4419B Power Meter User's Guide
combination of sensor type, sensor calibration table and frequency
dependent offset table currently selected.
combinations for the two lines of the display. Find the table entry which
matches your display and use the reference number in the left-hand column
to look up Table 1-2
applied to the current measurement.
For example, the display shows:
50MHz
(10,C)
This is equivalent to reference number 4 in
Table 1-2 shows that:
• the sensor type is 8480 series
• a sensor calibration table is selected (10)
• a frequency dependent offset table is selected (C).
Upper
Display Line
1 CF:xxx.x%
2 CF:xxx.x%
3 xxx.xyHz
4 xxx.xyHz
5 xxx.xyHz
6 xxx.xyHz
Where "y" is the frequency multiplier (M or G), "nn" is the sensor
calibration table number and "a" is the frequency dependent off-
set table letter.
for the combination of sensor type and correction being
Lower
Display Line
xxx.xyHz(a)
(nn)
(nn,a)
(a)
Getting Started
Table 1-1 shows all the possible
Table 1-1 and when looked up in
1
9