Agilent Technologies E4419B User Manual page 194

5 Specifications
1 Within one hour after zero set, at a constant temperature after a 24-hour warm-up of the
2 The number of averages at 16 (for normal mode) and 32 (for x2 mode), at a constant
3 The zero drift and measurement noise specifications are tested at 50 MHz.
172
Power Sensor
Agilent N8486AR (exclude Option
3
CFT)
Agilent N8486AQ (exclude Option
3
CFT)
Agilent N8487A (exclude Option CFT)
Agilent N8488A (exclude Option CFT)
Agilent N8481A with Option CFT
Agilent N8481B with Option CFT
Agilent N8481H with Option CFT
Agilent N8482A with Option CFT
Agilent N8482B with Option CFT
Agilent N8482H with Option CFT
Agilent N8485A with Option CFT
Agilent N8486AR with Option CFT
Agilent N8486AQ with Option CFT
Agilent N8487A with Option CFT
power meter.
temperature, measured over a one minute interval and two standard deviations. For
Agilent E-Series power sensors, the measurement noise is measured within the low range.
Refer to the relevant power sensor manual for further information.
1
Zero Drift
<±3 nW
<±3 nW
3
<±3 nW
3
<±3 nW
3
<±7 nW
3
<±7 µW
3
<±0.7 µW
3
<±7 nW
3
<±7 µW
3
<±0.7 µW
3
<±7 nW
3
<±7 nW
3
<±7 nW
3
<±7 nW
Measurement Noise
<80 nW
<80 nW
<80 nW
<80 nW
<114 nW
<114 µW
<11.4 µW
<114 nW
<114 µW
<11.4 µW
<114 nW
<114 nW
<114 nW
<114 nW
E4419B Power Meter User's Guide
2