Agilent Technologies E4419B User Manual page 30

1 Getting Started
3 The measurement data is displayed in either one or two rectangular
4 This is the measurement result field.
5 This field displays the units of measurement, either dBm, dB, Watts, or %.
6 This window is configured to show an analog meter which displays the
7 This field displays the number of pages in the current softkey menu. For
8 Any softkeys available are displayed in these four fields.
9 This field displays the title of the menu. For example, when the power
10 This field indicates if the measurement result is out of the upper or lower
11 This field displays "Rel" if relative mode is on. Refer to
12 This field displays "Ofs" if an offset is set. Refer to
13 This field displays "Rng Hld" if a range is selected. Refer to
14 This field displays "Dty Cyc" if a duty cycle is set. This allows you to
8
windows depending on the setting of
toggle between a one or two window display. When two windows are
displayed and this key is pressed, the single window displayed is the one
which was previously highlighted with the shadowed box. On the two
window display, the measurement setup menus work on the window which
is shadowed.
measurement result and the meter scaling.
example, "1 of 2" indicates that there are two pages of softkeys and you
are on the first page. Pressing
meter is initially switched on, the "Contrast" menu is displayed and if you
press , "Zero/Cal" is displayed.
limits set. If the measurement is within the limits, this field is empty. If the
measurement result is less than the minimum limit set, "Undr Lmt" is
displayed. If the measurement result is more than the maximum limit set,
"Over Lmt" is displayed. Refer to
page 73 for further information.
Measurements" on page 64 for further information.
page 66 for further information.
Range" on page 85 for further information.
measure the power of a pulsed signal. Refer to
Signals" on page 71 for further information.
. Pressing
moves you to page "2 of 2".
"Setting Measurement Limits"
"Setting Offsets"
"Measuring Pulsed
E4419B Power Meter User's Guide
allows you to
on
"Making Relative
on
"Setting the