3
Menu Reference
138
Change
■
Press this softkey to modify the highlighted parameter, which is
either a frequency, calibration factor, offset or table name. A
pop-up window displays the parameter. Use the
and
keys to change the parameter value. To confirm your
choice, press
Insert
■
Press this softkey to insert a new table entry. You are prompted to
enter the frequency and calibration factor, or offset. The entry is
inserted in ascending frequency order.
Delete
■
Press this softkey to delete a table entry. If you delete the
frequency, the corresponding calibration factor or offset is also
removed and vice versa.
Done
■
Press this softkey to return to the measurement screen. The
softkeys from the first level of the "System/Inputs" menu are
displayed.
Freq Dep Offset
•
Press this softkey to access a menu and screen which allows you to select
and edit frequency dependent offset tables. Use the
scroll through the displayed frequency dependent offset tables.
Edit Table
■
Press this softkey to access the menu and screen which allows you to
modify, add and remove frequency, calibration factors and offsets
from the currently selected table and modify the table name. Use the
,
,
calibration factors and offsets. Press
follows:
Change
■
Press this softkey to modify the highlighted parameter, which is
either a frequency, calibration factor, offset or table name. A
pop-up window displays the parameter. Use the
and
keys to change the parameter value. To confirm your
choice, press
Enter
.
, and
keys to move between the name, frequency,
Enter
.
,
and
Change Insert
,
, or
Delete
,
E4419B Power Meter User's Guide
,
,
keys to
as
,
,