Agilent Technologies E4419B User Manual page 162

3 Menu Reference
140
Offset Off On
•
Press this softkey to toggle the channel offset value on or off. The default
is "Off". The offset value is set using
Offset
•
Press this softkey to enter a channel offset in the range of –100 dB to
+100 dB. The default value is 0 dB. Use the
keys to change the value. To confirm your choice, press
can be used to compensate for a loss or gain. The offset is applied to the
measured power before the result is displayed.
automatically set to "On" when a value is entered using
"Setting Channel Offsets"
Range (Agilent E-Series power sensors or N8480 Series power sensors
•
(excluding Option CFT) only)
Press this softkey to set the range in which you require the power meter
to make the power measurement or set the power meter to autoranging.
Choose either "UPPER", "LOWER" or "AUTO" from the selection
available using the
"Setting the Range"
Limits
•
Press this softkey to access a menu which allows you to enter the upper
and lower measurement limits. Refer to
page 73 for further information.
Limits Off On
■
Press this softkey to toggle between the test limits being on or off. The
default is "Off".
Max
■
Press this softkey to enter the upper measurement limit in the range
–150 dBm to 230 dBm. The default value is 90.00 dBm. Use the
, , and
press the appropriate measurement units.
Min .
Min
■
Press this softkey to enter the lower measurement limit in the range
–150 dBm to 230 dBm. The default value is –90.00 dBm. Use the
, , and
press the appropriate measurement units.
Max .
Offset
on page 66 for further information.
and keys. The default is "AUTO". Refer to
on page 85 for further information.
"Setting Measurement Limits"
keys to change the value. To confirm your choice,
keys to change the value. To confirm your choice,
.
, , , and
. This offset
dB
Offset Off On is
Offset
Max must be greater than
Min must be less than
E4419B Power Meter User's Guide
. Refer to
on
,
,