Agilent Technologies E4419B User Manual page 156

3 Menu Reference
•
•
The softkey menu structured to this key affects the system setup and the
channel setup.
Press this key to access the "System/Inputs" menu. This menu allows you to
set up a variety of conditions for your power meter, for example: GPIB
address, serial interface parameters, sensor calibration tables, averaging, duty
cycle, range, offset, service. It also allows you to review errors.
•
134
Edit Name
Press this softkey to change a file name. First, use the
scroll between the displayed files. When the file name you require to change
is highlighted, press
Use the , ,
the file name. To confirm your choice, press
Enter
•
Press this softkey to accept your edited file name as a new name.
Insert Char
•
Press this softkey to insert an additional character. The character is
inserted prior to the one which is currently highlighted. A maximum of
12 characters can be used.
Delete Char
•
Press this softkey to delete the character which is currently highlighted.
The minimum number of characters allowed is 1.
Cancel
•
Press this softkey to revert back to the original file name, ignoring your
editing.
Done
Press this softkey to return to the measurement screen.
Remote Interface
Press this softkey to access a menu which allows you to select and configure
the remote interface, select the command set you want to use or obtain an
interface overview
Edit Name . A pop-up window appears on the screen.
, , Insert Chare
and
and Delete Chare keys to change
Enter .
E4419B Power Meter User's Guide
keys to