Figure 2-5 "Edit Cal" Screen - Agilent Technologies E4419B User Manual

2 Power Meter Operation

Figure 2-5 "Edit Cal" Screen

The power meter is shipped with a set of predefined sensor calibration tables.
The data in these tables is based on statistical averages for a range of Agilent
Technologies power sensors.
These power sensors are:
• DEFAULT
• Agilent 8481A
• Agilent 8482A
• Agilent 8483A
• Agilent 8481D
• Agilent 8485A
• Agilent R8486A
• Agilent Q8486A
• Agilent R8486D
• Agilent 8487A
There are also ten sensor calibration tables named CUSTOM_0 through
CUSTOM_9 which do not contain any data when the power meter is shipped
from the factory.
2 The Agilent 8482B and Agilent 8482H power sensors use the same data as the Agilent 8482A.
50
1
2
1 DEFAULT is a sensor calibration table in which the reference calibration factor and calibration factors are
100%. This sensor calibration table can be used during the performance testing of the power meter.
E4419B Power Meter User's Guide