Figure 2-14 Remote I/O Ttl Outputs - Agilent Technologies E4419B User Manual

2 Power Meter Operation
1 2 3 4 5 6 7 8

Figure 2-14 Remote I/O TTL Outputs

To set the limits:
1 Press
2 To change either of these settings, press the appropriate softkey. The power
3 To confirm your choice, press the appropriate measurement units.
Limits can be disabled and re-enabled simply by pressing
76
Limits
,
limits are displayed under the
meter displays the current value in a pop-up window. Modify this value (see
below) until the desired value is displayed.
• Use or to modify the digit on which the cursor is currently
positioned.
• Use or to move to other digits.
Pin Number Connection
1 none
2 Ground
3 Upper Window TTL Output
4 Lower Window TTL Output
5 TTL Input 1
6 TTL Input 2
7 Ground
8 Ground
. The current setting of the maximum and minimum
Max Min
and softkeys respectively.
Limits Off On
E4419B Power Meter User's Guide
.