Step Detection - Agilent Technologies E4419B User Manual

2 Power Meter Operation

Step Detection

To reduce the filter settling time after a significant step in the measured power
the filter can be set to re-initialise upon detection of a step increase or
decrease in the measured power. Step detection can be set in both manual and
automatic filter modes.
To set step detection for channel A:
1 Press
2 Press the
3 Use the
For channel B, use the steps above except use
ChB Filter
70
, A Input Settings
ChA Filter softkey to access the filter menu.
Step Det Off On softkey to enable or disable step detection.
.
, .
A Input Settings
E4419B Power Meter User's Guide
and